Creepcakes and Chocolate DoodleBats

Sure, plastic toys on top of cupcakes are fun, albeit a potential choking hazard, but how much more fun is a cupcake when everything is edible? Way more fun.

These Creepcakes are surprisingly easy with the help of some DoodleBats from ScrapNfonts and some chocolate. Yumm.

Here's what you need to get started: Wax paper, chocolate chips (or better yet, chocolate almond bark if you have it), a ziplock baggie, and a printout of DoodleBats.


In selecting DoodleBats for your printout, make sure you pick images that are solid black with no separate parts. Scale them big enough so they're about two inches tall when printed out. DoodleBats with a lot of good images are DB Boo Ya and DB Haunted House. I also used DB Vintage Halloween.

You can also use any of the Jack-o-Pattern DoodleBats if you remember to use the negative of the image as your template. It helps me to draw a circle around the outside of the image, then I use the white shape as my guide.

I used chocolate chips, but on a hot day the chocolate may not set firmly. Chocolate almond bark would probably work better.

Melt the chocolate. I just did mine in the microwave for 20-30 second intervals, stirring in between just until it was smooth. You don't need very much chocolate, I used about half a cup and had extra. A little goes a long way.

Spoon the melted chocolate into the corner of the ziplock baggie. Try to gently deflate some of the air out of the back before you zip it shut.

Take a sheet of wax paper and lay it over your DoodleBat printout. You should be able to see the DoodleBats underneath it. Now carefully snip a tiny piece of the corner off of the ziplock baggie. If it seems too small a hole, you can always cut more. Hold the baggie like a frosting piping bag, and carefully trace the DoodleBat images in chocolate.

I always like to outline the edges first, then fill them in with chocolate.

Make sure the images you are making in chocolate are thick enough to stand on their own. I went over some of my more fragile looking chocolate lines twice just to make sure they were thick enough.

I really liked the skulls, the spider web, and that funky spooky tree, so I made multiple copies of them by shifting my DoodleBat printout underneath the wax paper.

Make more copies than you think you will need and plan for a couple casualties.

After you've finished piping all the shapes, carefully move the wax paper to a cookie sheet and chill the chocolate until it is solid. Carefully remove the chocolate shapes one at a time by peeling the wax paper out from underneath. Finally, prop them on your cupcakes!

I love the final look!

These creepcakes will be a scream at Halloween gatherings!

If you want an idea that's even more quick, printed DoodleBats can make great cupcake toppers with some markers, a toothpick and a little tape or glue.

These were made with DB Circles - Halloween and the tombstone on the right was made with SNF Dagger.

I love these little pirate flags. All three of them are in DB Pirate (the sneak peek product for this month).

The creepy printed decor can work as a cupcake wrapper, too. You can make your own with fonts and DoodleBats (the one below features LD Jambalaya) or LetteringDelights.com has a lot of pre-made cupcake wrappers to choose from.

Whatever you do, make it fun, make it crafty, and make yourself a Happy Halloween!

Shop ScrapNfonts.com for the widest variety of craft and scrapbooking fonts, DoodleBats, WordArt and Brushes.

Photo tip: Tell your story better with photos

We've all seen it, maybe even been guilty of it. We've looked through a scrapbook or a collection of photos and every photo is the same: a series of smiling faces looking at the camera. Each page looks like the next.

font: LD Fresh Air, lavender in background: DB Herb Garden

Although it's nice to see familiar faces, what stories do these photos tell? Do they remind us of the experiences we had? Is this the best way for us to capture our memories?

I don't think it is.

I remember visiting my sister one holiday and leafing through her photo album on the coffee table. I started as a casual observer, but quickly became engrossed as I feasted through a year of her life in pictures. Why was it so exciting to look through this book of mostly strangers and places I didn't know? I complimented her and her exciting life, and then she told me something that's stuck with me ever since. She said, the key to making photo albums interesting is to have a three-way balance of subject matter, typically 1/3 people, 1/3 locations and 1/3 things.

This seemed so simple! That's it? That's all you did to make your stories more exciting through photos? Yup. So let's dissect this a little.

1/3 People

Let's face it, photos of people are fun to look at. Especially children! However, taking photos of smiling faces over and over again doesn't tell a very good story. Yes, a few smiling faces here and there are good, but also take some candid shots, some action shots, and some goofy shots. It's also totally fine to mix categories. Want a view of Mt. Rushmore with your kids in front of it? Ta da! You've covered two categories of subject matter with one photo.

1/3 Locations

This is definitely the category I forget about most, but gosh it makes a big difference in setting the story. Such little things like a shot of the back-yard, an overview of the farmers market, the gorgeous nature view on your hike, or that historic building you visited set the stage and help you tell (and remember) the whole story.

I especially like the impact of different weather and time of day. A photo of a hill with fresh snow before the kids sled down it, what an exciting prospect it was! The sun setting on the lake shore where you had a campout, remember the relaxing peace. You get the picture... or at least I hope you will.

1/3 Things

This category can be really fun and tell so much about your interests. In my personal life narrative, food is oh, so important. Close up shots of what I make or eat are a fun part of my memory books. Some other ideas include cars, toys, animals, flowers... the list can go on and on. Just think of what you're doing, what interests you, what tells your story and even the most mundane objects can become exciting chapters in your photo album. In my father's photo album, he has pictures of furniture when my parents were first married. Now, 40 years later, it's so fun to see the colors and decor they had so early in their life together!

Taking this balance into mind, I made a two-page spread of an outing with my daughter. There are six photos total, but I tried to balance the above categories in them.

font: LD Fresh Air, lavender in background: DB Herb Garden

font: SNF Lavender

It's really exciting to see the story told almost exclusively in pictures! Of course, a little journaling always is nice.

What do you think? Do you have favorite ways to tell your stories?

Frame used in subtitle images is from Film Frame Brushes.

Shop ScrapNfonts.com for the widest variety of craft and scrapbooking fonts, DoodleBats, WordArt and Brushes.

Lucky Day! T-shirts made easy

I have a new obsession. I can't stop myself from making t-shirts with iron-on transfers.

What sparked this obsession you may wonder? It was the discovery of iron-on transfer paper that I can print out from my own printer!

If you haven't used this, you may be as skeptical as I was when I first saw it. Psh, that won't last through one wash! It will peel and crack and look TACKY. That's what I used to think. I'm here to tell you if you do it right, it will last and can look awesome.

My first shirt was for my husband who wanted a shirt to honor his favorite basketball player. He wears it all. the. time. We've washed it over and over and it still looks great (and feels softer with each wash).

Making a shirt

I decided I wanted St. Patrick's Day shirts that we could wear past St. Patrick's Day, too. That is where this tutorial begins. Enter SNF Jolly Curls, SNF Sophia and DB Lucky Trinket in fun, lucky designs.

First rule: before you print your design onto the transfer paper, make it a mirror image because you will be ironing it face down. Most design programs will let you do this or your printer may have a reverse or mirror image setting.

Next, cut out your image with a narrow margin around it. Try to keep corners rounded.

Here is when the nit-picky details make a difference. First, drain all the water from your iron and let it heat up for 5 minutes to evaporate any moisture. Don't take out your ironing boards. These transfers need a hard flat surface that can trap the heat between the iron and the surface. The instructions recommend veneer or laminate countertops covered by a pillowcase. I can do that.

Iron the pillowcase and your shirt (or fabric if your not doing a shirt) to make sure they are flat and free from moisture.

Then place your image face down how you want it on your fabric.

Push hard on your iron, with two hands, and slowly move the iron back and forth, up and down over your paper. Pay close attention to the edges. Make sure they get lots of heat and pressure. It should take 1-2 full minutes of slow pressured ironing to make sure you've got it.

Let your shirt cool for about two minutes and then carefully peel back the paper and reveal your creation! This is the exciting part.

Woo Hoo! It worked! (I haven't had it fail on me yet, but it's still exciting every time it works.)

I'm pretty pleased with my two St. Patty's shirts. If you like these designs, you can find slightly scaled down versions in this collection of Lucky Word Art at SNF.

Just so you know I'm not just making this obsession up, here is a sampling of some of the shirts I've made in the past few months.

I've burned through at least two packages of transfer paper. Good luck, and beware. It's funner to make these than you may think, and oh so easy.

Shop ScrapNfonts.com for the widest variety of craft and scrapbooking fonts, DoodleBats, WordArt and Brushes.

Use your fonts Awesomely

Valentine's Day is less than three weeks away. More than any other holiday, Valentine's day is the holiday of words. It's time to express your affection in notes, cards, or spoken word. This year let ScrapNfonts fonts do some of the talking! Here are three creative ways to spread those words of love in stunning cards:

1. For the Love of Fonts: use a lot of fonts in short words or phrases.

For this card I found how to spell "love" in a bunch of languages. You could also use adjectives to describe your loved one in a card like this.

I picked a different font for each language (SNF has a lot of fonts with international characters, all the Premium Fonts and many Standard Fonts), and puzzled them together on a card. I liked how it looked with boxes around each word, but it can be done collage style, too, without the boxes. If you have certain words that are more important than others, make them larger (like I did with "LOVE"). Tip: to fill in holes, add DoodleBats.

To see all the fonts I used in this card, go here.


2. Take fonts to the heart: Type your fonts within a shape or larger letters with the help of Photoshop.

Last Spring, Brian Tippetts gave us another example of this fun way to use fonts, and he included two free Photoshop template downloads to help you.

If you're using Photoshop, it's not hard to create this look on your own! I use Photoshop CS3, but the method is the same for a lot of versions of Photoshop.

First, Type the letters or DoodleBat you want. Pick a thick, simple font (like LD Mon Cherie or LD Modern Slab), or a solid simple DoodleBat image, and scale it BIG. I used the number 0 in DB Sweet Spring for the butterfly below.

Notice the layers window shows my butterfly as a text layer. For the next step, while your text layer is selected, go to the top menu bar for Layer > Type > Convert to Shape. When you click that, your layers window will look like this:

And your DoodleBat/letter will have a line around it, meaning it's selected and it's changed into a shape.

If your shape does not have a line around it, look at your layers window. The layer with the shape should have two parts, the first is a colored square and the second is a square with your shape in it. There is a little chain link between the two.

The shape square should have a double line around it. If it does, you're good for the next step. If it doesn't, click the shape square once and that should select the shape. It is important for the shape to be selected for the next step.

Next we select our type tool. Hover the cursor over your selected shape and the cursor should look different. It should have a dotted circle around it.

Make sure not to hover the cursor on the edge of the shape or you'll get a different cursor with a diagonal line through it. This cursor will allow you to type on the outside edge of your shape, which is a good tool, but not what we're trying to do here. Here are the two different cursors.

We want the cursor pictured on the left. Click the mouse when you see this cursor, and you can start typing in your shape. Make sure to make your font size smaller and use a font that looks good inside your shape. You may have to play with font size and paragraph alignment to get a look you like. For this card, I used LD Jambalaya.

Notice you now have a shape layer and a text layer. If you want to make your shape layer invisible, just click on the little eye next to the layer in the Layers window. The text layer will still type in your shape.

Finally, fit it into your layout, and you're done! Easier than you thought, eh? And totally cool.



3. Build a foundation of Love: Use blocks of text as a background element.

My husband and I have always loved the song "I Will" by the Beatles. By layering the words to that song subtly in the background of this card using LD Abe Lincoln, it introduces another layer of sentiment. The bird is from DB Sweet Spring and the brown font is LD Remington Portable.

This example uses a block of text as the ground layer for the eskimos. It's not the primary focus, but another fun way to add text and sentiment. The text is LD Advertise This and the eskimos are from DB Eskimo Kisses.

I hope you can use these ideas to make awesome Valentine's Day cards and future projects! Happy Fonting!

Shop ScrapNfonts.com for the widest variety of craft and scrapbooking fonts, DoodleBats, WordArt and Brushes.